If your boat is not listed, please fill out the Contact Us form specifying your boats make, model, and year in the details section.
Morgan 22 sailboat owners manual download#
Click on the Data Sheet listed next to the boat type to download a PDF. refer to our Pedestal Replacement Parts page.īelow are several of the most requested Steering Data Sheets. If you need specific internal pedestal parts such as bearings, shaft, washers, etc.
Morgan 22 sailboat owners manual pdf#
Simply download the PDF for your boat to find the replacement parts that you need.
You can also make marks on the whiskers with a felt tip pen.Edson's Steering Data Sheets are available for over 2500 boats and include a simple steering layout drawing and parts list. Changed the caption in step 24 1.7 Reassembly of the SuperFlow® 350 Demand Regulator to: The port and starboard whiskers should align with the whisker covering the main body so that the parting lines are in alignment (except in the SL 27 helmet, where the parting lines on the bottom of the whiskers should be 5/16" behind the mold line on the main body). For the SL 27 helmet ONLY, make sure that the parting line on the bottom of the whisker wings is 5/16" behind the parting line on the main body. Before doing the final tightening of the whisker clamps, make sure that the parting line on the bottom of the wings is lined up with the parting line on the main body. Changed step 21 in 1.7 Reassembly of the SuperFlow® 350 Demand Regulator to: Place whisker clamps around the grooves on each of the two whiskers. Before doing the final tightening of the tie-wraps, make sure that the parting line on the bottom of the wings is lined up with the parting line on the main body, and the heads of the tie wraps are positioned on the back of the body.Ĭhanged step 5 in 1.1.3 Post Dive Reassembly to: Place whisker clamps around the grooves in each of the two whiskers. Changed step 23 in 1.4 REX® Regulator Re-Assembly to: Place tie-wraps around the tie wrap grooves in each of the two whiskers. Changed jam nut to adjustment lock nut throughout module. Removed reference to specific torque specification in step 7 of 1.4 REX® Regulator Re-Assembly Changed spacer tube to sleeve in step 9 of 1.4 REX® Regulator Re-Assembly.
The lip of the main whisker body should completely cover the retaining ring, holding it in place.
Changed 1.2.1 to: Tighten the retaining ring until snug. You can also make marks on the whiskers with a felt tip pen. Changed caption on page 10 to: The port and starboard whiskers should align so that the parting line on the bottoms of the wings is lined up with the parting line on the main body, and the heads of the tie wraps are positioned on the back of the body. Before doing the final tightening of the tie wraps make sure that the parting line on the bottom of the wings is lined up with the parting line on the main body, and the heads of the tie wraps are positioned on the back of the body. Changed step 6 in 1.2.5 Post Dive Reassembly to: Place tie-wraps around the tie wrap grooves in each of the two whiskers.
0 kommentar(er)
